Stainless Works SSS012 Stainless Steel Beverage Dispenser Replacement Spigot (fits 1/2 inch opening
Stainless Works SSS012 Stainless Steel Beverage Dispenser Replacement Spigot (fits 1/2 inch opening by Stainless Works at Mint MD. MPN: 2054897. Hurry! Limited time offer. Offer valid only while supplies last. Stainless Works® Stainless Steel Spigot is designed to replace the cheap, easy to break and leaky plastic spigot on the market. Our spigots look
Stainless Works® Stainless Steel Spigot is designed to replace the cheap, easy to break and leaky plastic spigot on the market. Our spigots look elegant, feel solid, and last a lifetime(backed up by our life time warranty)Stainless Works® SSS012 Use and Care Instruction:
Before installation, wash in soapy water and rinse suggested
Remove the nut, and one set of washer, gasket from the spigot
Insert the spigot to the despenser
Install the gasket and washer
Tighten the nut. Usually hand-tight is good enough to create a water tight seal. You can also use 11/16 inch wrench. Do not over-tighten, over-tightening could crack the despenser made of fragile material like glass or ceramic.
After each use, rinse throughly with clean water with handle in partial open position(45 degree turn)
If used for sugary drink, we suggest that remove spigot from the dispener and clean throughly.
Package Content: 1 stainless steel spigot, 2 stainless steel washer, 2 silicon gasket, 1 stainless Steel nut. Warranty informaton is provided on the package.
Click on our brand name Staineless Works® above to see our products:
SSS010: Best Flow Rate at 3 sec/cup with 8 inch water
SSS012: Fits smaller holes(12mm or half inch), Flow Rate at 5 sec/cup
SSS016: Smoothest and effortless turning with limited flow, Flow Rate at 9 sec/cup
SSS020: Classic Design, Good Value. Flow Rate at 7 sec/cup .
We are selling spigot with chalkboard labels.
Check Model Number: SSS010-10L, SSS012-10L and SSS016-10L
Features & Highlights
- FIRST ON AMAZON: Launched on Mar 11, 2014, Stainless Works is the first brand for stainless steel spigot on Amazon.
- SOLID 304 STAINLESS STEEL CONSTRUCTION: No Lead, Acid Resistant. Great for Dispensing Tea, Beverage, Vinegar or Wine.
- Fast FLOW RATE: Quarter-Turn Stainless Ball Valve, 5 Seconds Per Cup. First Picture in Open Position, Turn Right to Close.
- UNIVERSAL FIT: Needs 1/2 inch or 12mm diameter opening to install.
- Easy Lifetime replacement warranty backed by OLDEGG INNOVATIONS, LLC, Connecticut, USA
|Color:||Polished Stainless Steel|
|Item Weight:||0.44 pounds|
|Item Size:||2.6 x 1.3 x 1.3 inches|
|Package Weight:||0.45 pounds|
|Package Size:||2.8 x 1.61 x 1.61 inches|